Tips To Maintain Adequate Water Temperature In Spokane, WA
Does your Spokane bathroom plumbing only feel scalding or shiver-inducing — no in-between? If so, you’re not the only one who’s experienced this issue. This common problem can turn daily showers into a frustrating experience. At Raptor Rooter & Plumbing, we understand how inconvenient this problem can be, and we’re here to help you discover the cause.
In this blog, we’ll explore some of the common causes behind this issue. Trust our experts to provide dino-mite tips for regaining control over your water temperature.
Common Causes Of Temperature Control Issues In Showers
When your shower temperature is either boiling or freezing, several factors can cause the issue. Understanding the potential reasons can help you identify the source of the problem and find the best solution.
1. Faulty Shower Faucets With Temperature Control
Shower faucets with temperature control capabilities are designed to maintain a steady water temperature. However, if the temperature control valve within the faucet is worn out, it can malfunction and result in temperature swings. A damaged valve may prevent the proper mixing of hot and cold water. This inefficiency can cause your shower to go from one extreme to the other.
Solution: Replacing the temperature control valve usually solves this issue. If you’re unsure how to proceed, our team at Raptor Rooter & Plumbing can assist you. Our Spokane plumbers can diagnose and replace faulty parts to restore balance to your shower.
2. Improperly Set Water Heater Thermostat
Sometimes, the issue might be with the settings on your water heater. If the thermostat is set too high, you may get only very hot water, while a low setting may only allow for cold or lukewarm water. It’s essential to ensure that the unit is set to an appropriate temperature for balanced hot and cold water.
Solution: Most water heaters have a thermostat that can be adjusted. Check your heater’s temperature setting and adjust it if necessary. The U.S. Department Of Energy recommends setting the temperature to 120 degrees Fahrenheit for safe, comfortable water.
3. Inconsistent Water Pressure
Inconsistent or low water pressure can lead to sudden temperature changes, especially when other fixtures in the house are used simultaneously. For example, flushing the toilet while the shower is running can create a temporary drop in cold water. This can cause the shower to feel too hot.
Solution: If inconsistent pressure is a recurring issue, consider installing a pressure-balancing valve. This addition helps regulate water flow to maintain a consistent temperature.
4. Aging Shower Valves
Older shower valves may lose their ability to properly mix hot and cold water over time. If your shower is either boiling or freezing with no in-between, it could be a sign that the valve has worn out and needs replacement.
Solution: Replacing an old valve with a new one can improve temperature control. Opting for modern valves with built-in temperature-balancing features can provide additional stability and prevent future issues.
How To Adjust Shower Temperature Control
If you’re experiencing extreme water temperatures, adjusting your shower temperature control could be the key to regaining a comfortable shower experience.
1. Turn Off The Water Supply
Before making adjustments, turn off the water supply to your shower. This critical step helps avoid accidental leaks or water damage.
2. Remove The Faucet Handle
Use a screwdriver to remove the handle covering the temperature control valve. You may need to refer to your shower’s manual for specific instructions.
3. Adjust The Temperature Limiting Stop
Most temperature control valves have a limiting stop that restricts how far the handle can turn toward hot water. Adjusting this stop can help balance the temperature, allowing for a greater range between hot and cold.
4. Reassemble The Faucet
After adjusting the limiting stop, reattach the faucet handle. Turn the water supply back on and turn on the faucet’s hot water to test the new settings. Adjust again if needed until you reach a comfortable balance.
If you’re unsure how to adjust the control settings, consider reaching out to a professional. The Spokane plumbers at Raptor Rooter & Plumbing are available to guide you through the process.
Troubleshooting Extreme Temperature Issues
If you’ve tried adjusting the temperature control mechanism and are still experiencing issues, here are a few other solutions to consider:
- Flush your water heater — Sediment buildup can affect water flow and cause temperature swings. A simple flush can improve performance.
- Install an anti-scald valve — Anti-scald valves help stabilize temperatures, especially if other appliances affect the water pressure.
- Inspect for plumbing leaks — Leaks in the plumbing can lead to inconsistent water temperatures. Check for visible leaks and address them quickly.
- Check your water heater’s age — Older water heaters may struggle to maintain consistent temperatures. If yours is near the end of its lifespan, replacement may be the best option.
Regain Control Of Spokane Plumbing Temperatures With Our Team
Living with unpredictable water temperatures can be frustrating. Luckily, with a few adjustments and potential repairs, you can enjoy balanced plumbing temperatures once again!
Raptor Rooter & Plumbing is here to assist you with your plumbing needs, from shower faucets with temperature control adjustments to complex repairs. Contact us today to restore your plumbing’s performance and efficiency!
The post Why Can I Only Get Very Hot Or Very Cold Water? appeared first on Raptor Rooter & Plumbing.